REQUIRED MATERIALS
In order to install the K2 Systems S-Dome installation system, the following listed system components are es-
sential. The piece quantities are calculated on the basis of the respective requirements. The listed item numbers
facilitate the comparison of items.
Mounting Rail K2 SpeedRail 22; 6.10 m
Material: aluminium EN AW-6063 T66
Alternatively: Mounting Rail K2 SpeedRail 4.15 m
| 1006039
K2 FlatConnector Set
The set consists of:
¬ 1 FlatConnector (1005451), aluminium
¬ 2 Bolts with serrated under head M8x20 (2001729), WS 6 mm, stainless steel A2
¬ 2 M K2 Slot nut with clip (1001643), stainless steel and PA
| 1001163
| 2001906
| 1005841
K2 Dome S1000
Width: 90 mm
Material: aluminium EN AW-6063 T66
| 2001695
| 2001696
K2 Building protection mat Dome Alu
470x180x18 mm
Material: PUR-bound rubber granules with aluminium triplex foil, laminated
Alternatively: K2 Building protection mat Dome
470x180x18 mm
Material: Unlaminated PUR-bonded rubber granulate
The respective use of a laminated or unlaminated building protection mat de-
pends on the type of roof membrane and must be checked on site.
| 2002312
K2 Dome block connector RW Set
Material: aluminium EN AW-6063 T66
| 2002313
K2 Dome block connector CW Set
Material: aluminium EN AW-6063 T66
| 2001967
K2 Dome S1000 2.0
Width: 65 mm
Material: aluminium EN AW-6063 T66
5 | 20
Materials Required
