GENERAL SAFETY INSTRUCTIONS
Please note that our general mounting instructions must be followed at all times and can be viewed online at
https://k2-systems.com/en/technical-information.
The following guidelines apply:
¬ The equipment may only be installed and operated by qualified and adequately trained installers.
¬ Prior to installation, ensure that the product complies with on-site static loading requirements. For roof-
mounted systems, the roof load-bearing capacity must always be checked.
¬ National and local building regulations and environmental requirements must be adhered to.
¬ Compliance with health and safety regulations, accident prevention guidelines and applicable standards is
required.
¬ Protective equipment such as safety helmet, boots and gloves must be worn.
¬ Roofing works must be in accordance with roofing regulations utilising fall protection safeguards when
eaves height exceeds 3 m.
¬ At least two people must be present for the duration of the installation work in order to provide rapid assis-
tance in the event of an emergency.
¬ K2 mounting systems are continuously developed and improved and the installation process may thereby
change at any time. Prior to installation consult our website at
https://k2-systems.com/en/technical-
for up-to-date instructions. We can send you the latest version on request.
¬ The assembly instructions of the module manufacturer must be adhered to.
¬ Equipotential bonding / grounding / earthing between individual parts is to be performed according to
country specific standards, as well as national laws and regulations.
¬ At least one copy of the assembly instructions should be available on site throughout the duration of the
installation.
¬ Failure to adhere to our general safety and assembly instructions and not using all system components, K2
is not liable for any resulting defects or damages. We do not accept liability for any damage resulting in the
use of competitor’s parts. Warranty is excluded in such cases.
¬ If all safety instructions are adhered to and the system is correctly installed, there is a product warranty
entitlement of 12 years.
¬ We strongly recommend reviewing our terms of guarantee, which can be viewed at
com/en/technical-information/general-information
. We will also send this information on request.
¬ Dismantling of the system is performed in reverse order to the assembly.
¬ K2 stainless steel components are available in different corrosion resistance classes. Each structure or com-
ponent must be carefully checked for possible corrosion exposure.
4 | 20
Safety Regulations