INSTALL THE WINDBREAKER
First position the upper fold of the symmetrical windbreaker
on the bar of the Dome S1000. The foiled surface must face
outwards. We recommend removing the foil once installati-
on is completed.
Align the windbreaker against the module edge and fasten
with the allen bolt M8x16 with the aid of the elongated
holes and washers in the screw channel.
When two windbreakers overlap, position the plates in such
a way that the screws can be screwed in the screw channel
with the aid of the elongated holes. For this a washer must
be used.
It must be ensured that the last windbreakers in a row do
not project over the Dome S1000.
Torque 16 Nm
Materials required: Dome S1000 Windbreaker, allen bolt
M8x16, 8.4 x 30 x 1.5 washer
9
of 9
18 | 20
Installation of S-Dome System