![background image](http://html1.mh-extra.com/html/k-systems/k1600/k1600_installation-start-up-operation_648622036.webp)
3 6
Installation and Start up cont.
Check Product names and Specific Gravities for each tank to see that what is displayed truly
reflects the tank contents. If not refer to Programming and Changing Data -Product Names &
Specific Gravities.
INSTALLATION AND START UP SUMMARY
1. Review Entire manual before Installation & Operation
2. Install cabinets per appropriate Data Sheets
3. Connect clean 120VAC power to power board terminals
4. Connect transmitter signal wires or tubing per appropriate Data Sheet
5. Connect Alarm Output wiring if required
6. Connect RS232 communication cable if required
7. Mount and connect optional remote alarm horn if required
8. Turn on system
9.
Silence Alarm horn and acknowledge any active alarms.
10. Check transmitter Zero Offset Values for each tank input and set if required
11. Check Product Names and Specific Gravities and change if required