2 0
Programming cont.
After pressing
<PROG>
to active the programming feature, a flashing number appears at the
bottom center of the screen.
Select the new product number and press
<ENTER>
.
The following screen appears after
ENTER
ing the product number:
The new product name and specific gravity appear on line 2 below the old information. If the
specific gravity shown for the new product is correct, press
<ENTER>
and the screen will
change to the inventory screen with the new product and gravity entered into the system and
product programming is complete.
If, however, the specific gravity for the new product needs to be altered then go to the next step.
TANK 1 WATER=1.000
1 WATER 4 PRDT 4
2 PRDT 2 5 PRDT 5
3 PRDT 3 6 PRCT 6
1
TANK 1 WATER=1.000
1 WATER 4 PRDT 4
2 PRDT 2 5 PRDT 5
3 PRDT 3 5 6 PRCT 6
TANK 1 WATER=1.000
PRDT 5 = 1.020 SPGR.
<PROG> TO CHNG PROD
SPGR, <ENTER> IF OK
