1 6
Access codes must be entered during the program phase, when prompted, in order to
modify tank or product parameters. Appropriate code levels required to change parameters
are listed below (a higher code level than required is acceptable).
ACCESS LEVELS REQUIRED TO CHANGE PARAMETERS
LOW
HIGH
MASTER
TIME AND DATE
ALARM SETPOINTS
RESERVED
PRODUCT NAMES
XMTR ZERO OFFSETS
SPECIFIC GRAVITIES
UNIT OF MEASURE SETTING
TIME AND DATE
TO PROGRAM PRESS
MULTI-TANK SCREEN DISPLAYS SINGLE-TANK SCREEN DISPLAYS
T I M E
DATE
Press the
<TIME/ZERO>
button twice from either the Multi-tank or Single tank display. Then press the
<PROG>
button to activate the programming feature. The screen displays access code:
Enter the low level access code. If a mistake is made the following screen
will be displayed and the sequence will have to be restarted from the
beginning.
08:47:15 09/15/89
NEW TIME: 08:47:15
NEW DATE: 09/15/89
tz
TO SET TIME/DATE
TIME
ZERO
TIME
ZERO
08:47:15 09/15/89
NEW TIME: 08:47:15
NEW DATE: 09/15/89
tz
TO SET TIME/DATE
<ENTER ACCESS CODE>
XXXX
