KNX/EIB
Switch Actuator with Secure
32
Note:
1. The value of the communication object "Input 1"
is logically operated
with “Switch” firstly, and
then the result will is logically with the value of “Input 2”, and the final operation result as the final
output (close the contact with “1”, open it with “0”).
2. If an input is not enabled, the input is ignored.
3. If logical result needs to be negated, the first negated, then the next step.
4, The signal can be passed if the GATE is open, otherwise it is ignored. For example, the input 0 of
value is ignored when the GATE of input 1 is closed, and the output is directly determined by the input 2.
Parameter “Invert result(if no,"1"=contact close,"0"=contact open;while yes is opposite)”
This parameter defines whether negate the logical operation results. Negate it when it is enabled,
Otherwise don't take to invert.
Parameter “Value of input 1 after bus recovery”
This parameter defines the default value of the object “Input 1 of logic” after bus voltage recovery.
Options:
“0”
“1”
Value before power off
The value will be the one before power off after bus voltage recovery when selecting “value before
power off”. After application programming, the object value is 0.
Parameter “Value of input 2 after bus recovery”
This parameter defines the default value of the object “Input 2 of logic” after bus voltage recovery.
Options:
“0”
“1”
