KNX/EIB
Switch Actuator with Secure
29
When the action triggered by telegram "1" selects “last position of contact”, it will be recovered to
the last switch status every time recalling telegram "1".
When the action triggered by telegram "1" selects ““Same as the telegram "0""”, it will carry out the
set parameters of the action triggered by telegram "0" every time recalling telegram "1".
Parameter “Preset can be changed via bus”
It is used to set whether changing the preset value by the bus. It is allowable to change the value
and enable the object “Store preset” at the same time when enabled, which can save the current status
as the new preset value.
The current value is saved as new telegram "0" when receiving the telegram “0”; as new telegram
"1" when “1”.
The current status will be saved in the new preset value if selecting “None” in “Output status of the
telegram "0"” and “Last position of contact” or “Same as the telegram "0"” in “output status of the
telegram “1” (object value=1)”.
Note: It will save the new preset value after bus voltage recovery.
