KNX/EIB
Switch Actuator with Secure
22
4.4.1. Parameter window “X: Time”
Fig. 4.4.1 Parameter window “X: Time”
This parameter window will become visible when the parameter “Function of ‘time’ for switch” is
enabled in the parameter window “X:Function”. See Fig. 4.4.1which is used to enable/disable the time
function via bus.
Parameter “The Mode Of Time function”
The parameter defines the type of the timing function setup. Options:
Delay switch
Flashing switch
Staircase lighting
4.4.1.1
Selection “Delay switch”
The parameter window of the time function in Fig. 4.4.1.1 will be shown when selecting “Delay
switch”.
Fig. 4.4.1.1 Parameter window “X: Time”-Delay
