97
Explanations
Problems Related to Error Code and On-screen Display (continued)
*1:
The buzzer will sound when an error occurs.
*2:
A signal will be output to the [WARNING OUT] terminal when an error occurs.
*3:
When the hard disk is full, priority is given to this display even when the command to start recording is received by pressing
the [REC/STOP] button or alarm input during playback. (Blinks for 5 seconds.)
Troubleshooting (continued)
On-screen Message
Cause and Recovery
Refer
to
Page
“HARD-DISK CAPACITY IS VERY
LITTLE”
•
Recordable space on the hard disk is running out.
→
When hard disk space is about to run out, make changes accordingly
such as formatting the hard disk or changing the setting to the Repeat
Record mode.
* All event record data will be deleted when formatting is executed.
P51
P32
“NO HARD-DISK REMAINING
CAPACITY”
*1, *3
•
No space available on the hard disk for recording.
→
Format the hard disk to create recording space or set Repeat REC to
values other than “OFF”.
* All event record data will be deleted when formatting is executed.
P51
P32
“CAPACITY FOR EVENT IS
HARDLY”
•
There is a possibility that the deletion of old events or playback is being
halted prior to all of the capacity on the hard disk being used, owing to
the incorrect setup of the REC PATTERN parameter.
→
Amend the setting to reduce the frequency and number of times the
alarm is triggered.
P31
“NO CAPACITY FOR EVENT ANY
MORE (0%)”
•
The deletion of old events or playback is being halted prior to all of the
capacity on the hard disk being used, owing to the incorrect setup of the
REC PATTERN parameter.
→
Amend the setting to reduce the frequency and number of times the
alarm is triggered.
P31
“NTP SERVER CONNECTION
ERROR”
•
The NTP server registration has been enabled, but a connection to the
NTP server failed.
→
Repeat the NTP server registration procedure, or set the NTP server
function to DISENABLE.
P78
“SYSTEM REBOOTED TO
CHECK HARD DISK”
•
The system has been rebooted due to temporary unstable operations in
the HDD. (power fail to additional hard disk units, etc.)
Displayed during HDD substitute sector processing.
→
Operations may be continued without problem if the system returns to
normal after rebooting. Consult your nearest JVC Dealer if this problem
occurs frequently.
P55
