JVC VR-509E Instructions Manual Download

Page: 48 / 128

Useful Features

1. Press the [MENU] button.

• Opens the menus in accordance with the instructions

provided in Changing MENU Settings (page 17) in the
sequence of [MENU]

→

[OPERATION MENU]

→

[ONSCREEN/OPERATION]

→

[OPERATION].

2. Select your desired item with [

], and then change

the setting with [–/+].

Settings

BASIC:

Cancels the lock with button operation.

PASSCODE (MODE1):Passcode input required to cancel lock.
PASSCODE (MODE2):The passcode and sub-passcode must

be entered to cancel this.
(Page 54 “Pass Code Setup”)

* The button operations selected with [OPERATION LOCK]

will be locked when [BASIC] or [PASSCODE (MODE 1)] have
been selected. All button operations will be locked when
[PASSCODE (MODE 2)] has been selected.

* Only “BASIC” can be set when nothing has been specified for

the passcode. “PASSCODE” cannot be specified.

The button operations that will be released are shown in the
following table.

OFF:

Disables the “OPERATION LOCK”.

REC STOP: Some of the button operations are prohibited.

(See table 4)

ALL:

All of the button operations are prohibited.
(See table 4)

USER:

User can set the button operation to be prohibited
optionally. (See table 5)

Operation type:

REC STOP, PLAY, CHANGE SETTING, CHANGE
MONITOR, OPERATION, DVD

Selections:

ON, OFF

3. Press the [SET] button.

• A confirmation screen will be displayed.

4. Select [SAVE] with [

], and then press the [SET]

button.

* Menu setup is possible even when the operation lock has

been activated when the [CHANGE SETTING] parameter on

the [USER] settings has been set at “OFF”. However, the

parameters related to the operation lock cannot be amended.

Amendments to the operation lock settings can only be made

after the operation lock has been cancelled.

Table 4: Buttons to be prohibited (REC STOP, ALL)

Table 5: Buttons to be prohibited (USER)

Setting OPERATION LOCK

OPE LOCK RELEASE

Release Method

Released Button

Operations

BASIC

All locked button
operations

PASSCODE
(MODE1)

Passcode Entry

PASSCODE
(MODE2)

Sub-passcode Entry

Button operations un-
locked with the following
OPERATION LOCK.

OPERATION LOCK

OPERATION

RECOVERY REC
REC INDICATOR
REPEAT REC
OPE LOCK RELEASE
OPERATION LOCK
REC STOP
PLAY
CHANGE SETTING
CHANGE MONITOR
OPERATION
DVD

PRIOR STATE

ALL

BASIC

REC STOP

OFF
OFF
OFF
OFF
OFF
OFF

Front Button

REC STOP

ALL

[REC]
[ALARM RESET]

DISABLE

[STOP]
[PLAY/PAUSE]
[SHUTTLE DIAL]
[JOG DIAL]
[SKIP]

ENABLE

DISABLE

[MENU]

DISABLE

[FUNCTION]

ENABLE

DISABLE

[KEYPAD 1-9]
[SPLIT]
[SEQUENCE]

ENABLE

DISABLE

[OPERATE]
[TIMER/MODE]

DISABLE

[CANCEL]

ENABLE

DISABLE

[HDD(DVD)/0]
[OPEN/CLOSE]

DISABLE

Front Button

Type

[REC]
[ALARM RESET]

REC STOP

[STOP]
[PLAY/PAUSE]
[SHUTTLE DIAL]
[JOG DIAL]
[SKIP]

PLAY

[MENU]
[FUNCTION]

CHANGE
SETTING

[KEYPAD 1-9]
[SPLIT]
[SEQUENCE]

CHANGE

MONITOR

[OPERATE]
[TIMER/MODE]
[CANCEL]

OPERATION

[HDD(DVD)/0]
[OPEN/CLOSE]

DVD

Summary of Contents for VR-509E

































































































































Search results

Summary of Contents for VR-509E

Reviews:

Related manuals for VR-509E

Brands by name

Popular brands

JVC VR-509E, Instructions Manual

Search results

Summary of Contents for VR-509E

Reviews:

Related manuals for VR-509E

Brands by name

Popular brands