45
Playing Back Recorded Images
Images can be viewed in an enlarged mode.
Only single-screen displays can be enlarged.
* Enlarged displays are not possible when live images are
being displayed.
1. Start playback (See page 40 “Playing Back Images”)
2. Press buttons [1] to [9] to select the camera input that
is to be enlarged.
3. Press the [PLAY/PAUSE] button.
• Playback will be paused.
* It is possible to enlarge images during playback.
4. Press the [1] to [9] buttons (the button pressed in 2.)
for approximately two consecutive seconds.
• The range of enlargement will be displayed on the screen.
5. Move the range of enlargement with [
S
/
T
/
W
/
X
], and
then press the [SET] button.
• The selected area will be displayed at double the size.
• Adjust the area being displayed with [
S
/
T
/
W
/
X
] if necessary.
6. Press the [+] button.
• The area will be displayed at four times the normal size.
• Adjust the area being displayed with [
S
/
T
/
W
/
X
] if necessary.
• Press the [–] button to return to the double-size display.
7. Press the [RETURN].
* If the [EVENT SEARCH] screen or the setup menu is
displayed, the image zoom function will be ended and the
image will return to its normal played back size.
Sets whether to link the AUDIO 1 or 2 to a specified input or not.
Or sets the input audio that was not specified for the AUDIO 1
link or AUDIO 2 link.
1. Press the [MENU] button.
• Opens the menus in accordance with the instructions
provided in Changing MENU Settings (page 17) in the
sequence of [MENU]
→
[OPERATION MENU]
→
[MONITOR]
→
[AUDIO OUT].
2. Select your desired item with
[
S
/
T
]
, and change the
setting value with [–/+].
Settings
z
(NOT DESIGNATED):The link is not specified.
CAMERA 1-9: AUDIO 1 output.
* Audio sound will be output when the single screen is
displayed.
z
(NOT DESIGNATED):The link is not specified.
CAMERA 1-9: AUDIO 2 output.
* Audio sound will be output when the single screen is
displayed.
OFF:
AUDIO not output.
AUDIO1: AUDIO 1 is output.
AUDIO2: AUDIO 2 is output.
3. Press the [SET] button.
• A confirmation screen will be displayed.
4. Select [SAVE] with [
W
/
X
], and then press [SET].
* Audio sound will not be output when the frame rate per
second is set at 0.08 or 0.2. (See F.RATE on page 31)
* There are cases where the audio sound may break up when
parts that contain many alarms are played back, and during
split-screen playback.
Enlarging Images (Image Zoom)
Double-Size Enlargement
Four-Fold Enlargement
Ending the Enlarged Display
Green (x4 enlargement range)
Red (x2 enlargement range)
AUDIO OUT
AUDIO 01LINK
AUDIO 02LINK
AUDIO FIXED
(When displaying the SPLIT screen)
AUDIO OUT
AUDIO 01 LINK
AUDIO 02 LINK
AUDIO FIXED
(NOT DESIGNATED)
(NOT DESIGNATED)
AUDIO 1
2.
