JVC KY-PZ510BE, Instructions Manual

Page: 28 / 60

View Remote Screen
.
P
C
A
B
I
M
R
Q
S
T
U
D
L
N
O
F
H
K
J
E
G
V
Memo :
0
Some menu items may not be configurable
depending on the operating mode and status of
the camera.
0
After changing the setting menu, the setting
value may be initialized if the power is turned off
before the saving is completed with the [Submit
＆ Reboot] or [Submit] button.
0
Depending on the camera condition, the actual
setting value may not be reflected on the display
of the View Remote screen. In this case, reload
the web browser.
A
Settings menu selection switch
Displays the different settings menus.
Selecting “Image” displays the camera image.
Memo :
0
Audio is not output.
0
Supports full-screen display.
0
To display the menu on the live screen,
configure [Encode Codec] of [First stream] or
[Second stream] to “H.264”. If the menu display
is too small, decrease the [Resolution] for [First
stream] or [Second stream] accordingly.
B
Pan/tilt, menu control and HOME buttons
Moves the camera in one of the
H IJK
directions.
Pressing the HOME button restores the pan, tilt
and zoom positions to the default setting.
If the camera menu is open, move the cursor
using
H IJK
, followed by pressing the HOME
button to confirm.
Memo :
0
Selecting “OSD” at
D
Pan/tilt operation/
Camera menu call-up enables camera menu
operation. Selecting “PTZ” enables the camera
operation.
C
Pan/tilt operation/ Camera menu call-up
Selecting “OSD” displays the camera menu on
the live video of the web browser, streaming
video and HDMI (SDI) screen.
You can use the buttons at
B
to move the menu
cursor and to confirm your selection.
Selecting “PTZ” closes the camera menu. You
can pan and tilt using the buttons at
B
.
D
Back button
Returns to the next higher level in the menu
during menu operation.
E
Zoom In button
Moves the zoom toward the Tele-end.
F
Zoom Out button
Moves the zoom toward the Wide-end.
G
Focus In button
Moves the focus toward the Tele-end when the
camera is in the manual focus mode.
H
Focus Out button
Moves the focus toward the Wide-end when the
camera is in the Manual Focus mode.
I
Horizontal speed control
For configuring the speed of horizontal
movement.
[Setting Values: 1 to
R
10 to 24]
J
Vertical speed control
For configuring the speed of vertical movement.
[Setting Values: 1 to
R
10 to 20]
K
Zoom speed control
For specifying the zooming speed.
[Setting Values: 1 to
R
5 to 7]
L
Focus speed control
For setting the focusing speed.
[Setting Values: 1 to
R
5 to 7]
M
Preset number
After setting the preset number, pressing the
N
Preset button saves the pan, tilt or zoom
position and pressing the
O
Preset Call button
pans, tilts or zooms to the position that was
saved.
[Setting Values: 1 to 255]
N
Preset button
Saves the current pan/tilt/zoom position to the
preconfigured preset number.
O
Preset Call button
Calls up the corresponding pan/tilt/zoom
position using a preset number.
Memo :
0
The camera will not move if a pan/tilt/zoom
position is not stored in the selected preset
number.
28
View Remote Screen
Using View Remote