Setup Type
For selecting the method to configure the
streaming video.
[Setting Values: Recommended,
R
Manual]
9
Video Format
For selecting the streaming frame rate.
[Setting Values: UHD/2160p,
R
FHD/1080p, HD/
720p]
Memo :
0
Available when [Setup Type] is set to
“Recommended”.
9
Bandwidth
For selecting the streaming bandwidth.
[Setting Values: High, Medium,
R
Low]
Memo :
0
Available when [Setup Type] is set to
“Recommended”.
First Stream, Second Stream
RTSP and RTMP(S) allow simultaneous streaming
of videos in the First Stream and Second Stream
settings.
Memo :
0
Available when [Setup Type] is set to “manual”.
9
Encode Codec
For selecting the streaming video codec.
[Setting Values:
R
H.264, H.265, MJPEG]
Memo :
0
Select “H.264” or “H.265” when [Resolution]
(first stream) is set to “3840x2160”.
9
Resolution
For selecting the streaming video resolution.
[Setting Values (First Stream): 3840x2160,
R
1920x1080, 1280x720, 1024x576, 720x480,
720x408, 640x480, 640x360]
[Setting Values (Second Stream): 720x480,
720x408, 640x480,
R
640x360, 480x320,
320x240]
Memo :
0
When [Video Settings]
B
[Video Format] is set to
“3840x2160/60p”, “3840x2160/59.94p” or
“3840x2160/50p”, “3840x2160” cannot be
selected.
9
Frame Rate
For configuring the streaming video frame rate.
[Setting Values: 1 to 60]
Memo :
0
To configure [Frame Rate] to “60fps” or “50fps”
when [Resolution] is set to “3840x2160”,
configure [Video Settings]
B
[Video Format] to a
value other than “3840x2160/**p”.
9
Bit Rate
For configuring the bitrate of the video stream when
[Encode Codec] is configured to “H.264” or “H.
265”.
[Setting Values (First Stream): 32 to 61440
(
R
8192)]
[Setting Values (Second Stream): 32 to 20480
(
R
1024)]
9
Qfactor
For configuring the Q value when [Encode Codec]
is configured to “MJPEG”.
[Setting values: 1 to 99 (
R
80)]
9
I Key Frame Interval
Performs encoding with the I-frame as the starting
point.
Lowering the value to shorten the interval helps to
maintain a stable picture quality even when there
are rapid changes in the video image. However, the
picture quality for video images with little change
will deteriorate.
[Setting Values: 2 to 60]
9
Bit Rate Control
For selecting Constant Bitrate (CBR) or Variable
Bitrate (VBR).
[Setting values:
R
CBR, VBR]
Advanced Settings
9
Encode Level
For selecting a streaming video encoding level.
[Setting Values:
R
mainprofile, highprofile]
Memo :
0
If [Encode Codec] for [First Stream] or [Second
Stream] is configured to “H.265”, the setting is
fixed at “mainprofile”.
Video
33
Using View Remote
Summary of Contents for KY-PZ510BE
Page 59: ...59 ...
