Setup
Language
Switches between languages in the menu screen.
[Setting values:
R
EN, Français, Deutsch, In Italia,
Español, русский,
中文
,
日本語
]
Auto Inversion
For configuring the auto flip setting of the video
output.
On
: Flips the video image when the camera
is mounted to the ceiling. Video is not
flipped when the camera is installed on
a desktop.
Off
: Does not flip the video image when the
camera is mounted to the ceiling.
[Setting Values:
R
On, Off]
Tally Mode
For configuring whether to light up the tally lamp at
the front of the camera.
[Setting Values:
R
On, Off]
LCD Info.
For configuring the LCD Info..
[Setting Values:
R
On, Off]
Communication Setup
Protocol
For configuring the control protocols.
[Setting Values:
R
Standard, PELCO-D, PELCO-P,
Auto]
V_Address
For configuring the address of the Standard
protocol.
[Setting Values: 1 to 7 (
R
1)]
Memo :
0
This item can be configured when [Protocol] is
configured to “Standard” or “Auto”.
V_AddrFix
For configuring the necessity of the Address Set
command.
On
: Address Set command is not needed.
Off
: Address Set command is needed.
[Setting Values:
R
Off, On]
Memo :
0
This item can be configured when [Protocol] is
configured to “Standard” or “Auto”.
Net Mode
For configuring the serial port network control.
[Setting Values:
R
Serial, Paral]
Memo :
0
This item can be configured when [Protocol] is
configured to “Standard” or “Auto”.
P_D_Address
For configuring the address of PELCO-D.
[Setting Values: 0 to 254 (
R
1)]
Memo :
0
This item can be configured when [Protocol] is
configured to “PELCO-D” or “Auto”.
P_P_Address
For configuring the address of PELCO-P.
[Setting Values: 0 to 31 (
R
0)]
Memo :
0
This item can be configured when [Protocol] is
configured to “PELCO-P” or “Auto”.
Baudrate
For configuring the baud rate of the serial port.
[Setting Values: 2400, 4800,
R
9600, 38400]
Setup
47
Menu Display and Detailed Settings
Summary of Contents for KY-PZ510BE
Page 59: ...59 ...
