70
English
You can assign titles during play or recording
•
During play:
Entering a track title
The MD recorder repeats playback of the current track until you press
ENTER in step
6
. When you press ENTER, the next track will be
played.
Entering a disc title
The MD recorder repeats playback of all tracks of the MD until you
press ENTER in step
6
. When you press ENTER, the MD recorder
enters the track title entry mode.
Entering a group title
The MD recorder repeats playback of the tracks in the group until you
press ENTER in step
6
. When you press ENTER, the MD recorder
enters the next group title entry mode.
•
During recording:
Entering a track title
The MD recorder continues recording even after you press ENTER in
step
6
. When you press ENTER, a track title is assigned to the track
where you have started the title entry. If you do not press ENTER
before recording ends, the track title assigned will be canceled.
•
During Disc-MD or Disc-Tape Synchronized Recording (see pages 47,
48 and 52):
You can assign the disc title, and 16 track titles one after another as
recording goes on. The track titles you have entered are automatically
assigned to the tracks recorded on the MD in sequential order.
“EDITING” appears on the display for a while, then the next title entry
screen appears. If you enter 17th track title or more, they are ignored.
When you unplug the AC power cord or if a power
failure occurs before step
8
The editing you have made is not recorded on the MD.
To Change the Title
You can make a correction or change the title.
1
Follow steps
1
to
4
on page 68.
2
Select the character you want to
correct, by pressing UP
¢
or
DOWN
4
.
• Make sure that the character you want to change is flashing.
3
Press CANCEL to delete the character
you have selected in the above step.
4
Enter the correct character, referring to step
5
on
page 69.
5
Repeat steps
2
to
4
of the current procedure to
correct more characters.
6
Press ENTER to finish correcting the title.
“EDITING” appears on the display for a while, then the
next title entry screen appears.
• If you want to correct another title, select another title entry
mode by pressing UP
¢
or DOWN
4
, press SET, then
repeat from step
2
above.
• If you want to finish the correction, go to the next step.
7
Press
0
(MD eject) on the unit to eject
the MD.
“WRITING” and the
REC
(MD recording)
indicator flash while the editing you have made is
being recorded on the MD.
To erase all the characters,
press CANCEL repeatedly in step
3
above to erase all the characters, then go to step
6
.
MD
0
‹
/
8
EN63-70_UX-J99DVD[UB]5.p65
03.12.12, 11:06 PM
70
