14
English
Presetting Stations
You can preset 30 FM and 15 AM stations manually.
In some cases, test frequencies have been already stored
for the tuner since the factory examined the tuner preset
function before shipment. This is not a malfunction. You can
preset the stations you want into memory by following the
presetting method.
• There is a time limit in doing the following steps. If the setting is
canceled before you finish, start from step
2
again.
On the remote control ONLY:
1
Tune in to the station you want to preset.
• See “Tuning in to a Station” on page 13.
2
Press SET.
“SET” starts flashing on the display.
3
Press the number buttons to
select a preset number.
The selected preset number is flashing
on the display.
Ex.: For preset number 5, press 5.
For preset number 15, press +10,
then 5.
For preset number 20, press +10, then 10.
For preset number 30, press +10, +10, then 10.
4
Press SET again.
“STORED” appears on the display for a while.
The tuned station in step
1
is stored in the preset number
selected in step
3
.
• Storing a new station on an already assigned number erases
the previously stored one.
When you unplug the AC power cord or if a power
failure occurs
The FM and AM preset stations will be erased in a few days. If this happens,
preset the stations again.
Tuning in to a Preset Station
On the remote control ONLY:
1
Press FM/AM/AUX to select either
“FM” or “AM.”
The unit automatically turns on and tunes in to the previously
received station—either FM or AM.
• Each time you press the button, the band changes as follows:
* For operating the external equipment, see page 44 and the manuals
supplied with it.
2
Press the number buttons to
select the preset number you
want.
Ex.: For preset number 5, press 5.
For preset number 15, press +10,
then 5.
For preset number 20, press +10,
then 10.
For preset number 30, press +10, +10, then 10.
FM
AM
AUX
*
AUX–DIGITAL
*
Ex.: When you select an FM station in step
1
.
Ex.: When you select preset number 14.
EN13-14_UX-J99DVD[UB]5.p65
03.12.12, 11:02 PM
14
