- 19 -
6.2 Running Direction Setting
SW5 is used for setting the activate edge of the input signal,
off
means the activate edge is the rising edge, while
on is the falling edge
SW5
Off
on
Single pulse mode
Double pulse mode
6.3 Motor rotation direction setting
When SW6 switches between off and on,it can change the rotation
direction of the motor.off
CCW
on=CW
SW6
Off
on
CCW
CW
6.4 Pulse Interference Filter Settings
When the SW7 change between off or on ,the degree of pulse filtering
will be changed . The maximum pulse frequency can pass in “off” state is
200K, and the maximum pulse frequency can pass in “on“state is 100K.
In addition, other pulse filtering levels in the on state can be set by P22
parameters. (Note: When the P22 parameter is set, the SW7 dialing code
needs to be in on state. )
SW7
Off
on
The max pulse frequency
200K
The max pulse frequency
100K
Summary of Contents for iHSS86 Series
Page 2: ... 2 Address Floor2 Building A Hongwei Industrial Zone No 6 Liuxian 3rd Road Shenzhen China ...
Page 4: ... 4 All Copyright Reserved Version Edited by Proof readed By V1 02 Engineer Dept Engineer Dep ...
Page 15: ... 15 5 4 232 Connections to 232 Serial Communication Interface Definition Instruction ...
Page 17: ... 17 ...
