Just Motion Control iHSS86 Series, User Manual

Page: 26 / 28

- 26 -
Parameter P18, retained.
Parameter P19, instruction smooth coefficient. (Note: This parameter
modification only works when the SW8 instruction is smoothly dialled to
the on position. )
Parameter P20, subdivision dialing to the full on file, can enable
user-defined subdivision, subdivision value = P20 * 50.
Parameter P21, retained.
The parameter P22, the pulse filter parameter, the larger the value of this
parameter, the higher the corresponding filtering degree. P22 is 12 o'clock
and the pulse frequency is above 200K. When P22 is 33, the pulse
frequency is more than 100K and will be filtered out. (Note: This