Just Motion Control iHSS86 Series, User Manual

Page: 22 / 28

- 22 -
8 Installation Dimensions
9 Parameter Setting
The parameter setting method of IHSS86-XX drive is to use a HISU
adjuster through the 232 serial communication ports, only in this way can
set the parameters we want. There is a set of best default parameters to
the corresponding motor which are carefully adjusted by our engineers,
users only need refer to the following table, specific condition and set the
correct parameters
Actual value = Set value the corresponding dimension
Mod
e
Name Range Dimensi
on
Drive
Restart
Default
Value
P1 Current loop Kp 0 4000 1 NO 1000