Copyright © 2012, Juniper Networks, Inc.
1
WLA Series Technical Specifications
This chapter lists the technical specifications for the Juniper Networks WLA620,
WLA622, and WLA632. For detailed compliance information, see the
Regulatory
Guide
document.
WLA Mechanical and Compliance Specifications
Table 1 lists the mechanical and compliance specifications for the WLA620 and
WLA622.
Informational Note:
This Listed Accessory is designed and approved to be used only with
Juniper Networks WLC models WLC8 and WLC2. (The WLC200 does not directly connect
to the WLA.)
Informational Note:
The WLA radios are disabled by default and can be enabled only by
the system administrator using the RingMaster management application or the WLC’s
command-line interface (CLI).
Informational Note:
Regulatory Obligation: The radio frequency band, operating
channels, and transmit power depend on the country of operation specified by the system
administrator using RingMaster or the WLC’s CLI.
Table 1: WLA620 and WLA622 Mechanical and Compliance Specifications
Specification
Description
Maximum Channels
(Outdoor)
Based on the country of operation
Data Rates
802.11a:
6, 9, 12, 18, 24, 36, 48, 54 Mbps per channel
802.11g:
6, 9, 11, 12, 18, 24, 36, 48, 54 Mbps per channel
802.11b:
1, 2, 5.5, 11 Mbps per channel
Maximum Clients
64 for the radio interface set to access point mode
Modulation Types
802.11a: BPSK, QPSK, 16-QAM, 64-QAM
802.11g: CCK, BPSK, QPSK, OFDM
802.11b: CCK, BPSK, QPSK
Network Configuration
Access Point Mode:
Infrastructure
Bridge Mode:
Point-to-point and point-to-multipoint
