Juniper QFX5220 Hardware Manual Download

Page: 199 / 247

•

Always ensure that all modules, power supplies, and cover panels are fully inserted and that the installation

screws are fully tightened.

Definitions of Safety Warning Levels

The documentation uses the following levels of safety warnings (there are two Warning formats):

NOTE:

You might find this information helpful in a particular situation, or you might overlook this

important information if it was not highlighted in a Note.

CAUTION:

You need to observe the specified guidelines to prevent minor injury or

discomfort to you or severe damage to the device.

WARNING:

This symbol alerts you to the risk of personal injury from a laser.

206

Summary of Contents for QFX5220
























































































































































































































































Search results

Summary of Contents for QFX5220

Reviews:

Related manuals for QFX5220

Brands by name

Popular brands

Juniper QFX5220, Hardware Manual

Search results

Summary of Contents for QFX5220

Reviews:

Related manuals for QFX5220

Brands by name

Popular brands