Juniper QFX5220 Hardware Manual Download

Page: 75 / 247

Table 24: DC Power Supply LEDs on a QFX5220-32CD

Description

LED Color

Status

The power supply is disconnected from power, or power is not coming

into the power supply.

Off

Input OK

Input voltage is present and is within range.

Green, on steadily

The power supply is running at the power limit or is over current.

Off

Output OK

The power supply is operating correctly.

Green, on steadily

A power supply fault or error has occurred in the power supply. Replace

the power supply as soon as possible. To maintain proper airflow

through the chassis, leave the power supply installed in the chassis until

you are ready to replace it.

Amber, on steadily

Fault

The power supply is not valid. Check the model number.

Amber, blinking

Summary of Contents for QFX5220
























































































































































































































































Search results

Summary of Contents for QFX5220

Reviews:

Related manuals for QFX5220

Brands by name

Popular brands

Juniper QFX5220, Hardware Manual

Search results

Summary of Contents for QFX5220

Reviews:

Related manuals for QFX5220

Brands by name

Popular brands