Juniper QFX5220, Hardware Manual

Page: 110 / 247

Unpacking a QFX5220
The QFX5220 chassis is a rigid sheet-metal structure that houses the hardware components. A QFX5220
is shipped in a cardboard carton, secured with foam packing material.
CAUTION: The QFX5220 is maximally protected inside the shipping carton. Do not
unpack the switch until you are ready to begin installation.
To unpack a QFX5220:
1. Move the shipping carton to a staging area as close to the installation site as possible, but where you
have enough room to remove the system components.
2. Position the carton so that the arrows are pointing up.
3. Open the top flaps on the shipping carton.
4. Pull out the packing material holding the switch in place.
5. Verify the contents against the inventory included in the box. Table 40 on page 113 lists the inventory
of components supplied with a QFX5220-32CD and Table 41 on page 114 lists the inventory of
components supplied with a QFX5220-128C.
6. Save the shipping carton and packing materials in case you need to move or ship the switch later.
Table 40: Inventory of Components Supplied with a QFX5220-32CD Device
Quantity Component
1 Chassis
6, factory installed Fan modules
2, factory installed Power supplies
•
JPSU-1600W-1UACAFO for AC airflow out systems
•
JPSU-1600W-1UACAFI for AC airflow in systems
113