Juniper MX10008, Hardware Manual

Page: 38 / 361

Table 7: FRUs in an MX10008 Router (continued)
Type FRU
Hot-insertable and hot-removable.
We recommend that you take line cards offline before removing them. You can
take line cards offline by using the request chassis fpc slot slot-number offline
command.
NOTE: Line cards are not part of the base configuration or redundant configuration.
You must order them separately.
Line cards
Hot-insertable and hot-removable.
See “MX10008 Optical Transceiver and Cable Support” on page 119 for the Junos
OS release in which the transceivers were introduced.
Optical transceivers
NOTE: If you have a Juniper Care service contract, register any addition, change, or upgrade of
hardware components at https://www.juniper.net/customers/support/tools/updateinstallbase/ .
Failure to do so can result in significant delays if you need replacement parts. This note does not
apply if you replace an existing component with the same type of component.
SEE ALSO
MX10008 Components and Configurations | 31
MX10008 Optical Transceiver and Cable Support | 119
MX10008 Status Panel LEDs
The status panel of the MX10008 routers has two purposes:
•
Shows the overall status of the chassis
•
Indicates the type of power bus internal to the chassis
Some chassis ship with an enhanced power bus to support the power needs of higher wattage line cards.
The status panel indicates chassis status through a set of five bi-color LEDs. See Figure 14 on page 40 for
a chassis status panel with the standard power bus.
39