Juniper MX10008, Hardware Manual

Page: 317 / 361

CAUTION: If you are installing the MX10008 without a mechanical lift, remove all power
supplies, RCBs, SFBs, cover panels, and fan trays before attempting to install the router.
Unless you are using a mechanical lift, at least three people are required to perform the
rack installation.
•
Before installing an MX10008, read the guidelines in “MX10008 Site Preparation Checklist” on page 91
to verify that the intended site meets the specified power, environmental, and clearance requirements.
•
Before lifting or moving the MX10008, disconnect all external cables.
•
When raising the MX10008 into the rack, have two people lift and align the router with the rack while
another person secures the router to the rack. As when lifting any heavy object, lift most of the weight
with your legs rather than your back. Keep your knees bent and your back relatively straight and avoid
twisting your body as you lift. Balance the load evenly and be sure that your footing is solid.
RELATED DOCUMENTATION
General Safety Guidelines and Warnings | 313
Installation Instructions Warning | 319
Mounting an MX10008 in a 4-Post Rack Using a Mechanical Lift | 143
Manually Mounting an MX10008 in a 4-Post Rack | 147
320