Media Flow Controller CLI Commands
Media Flow Controller Administrator’s Guide
372
username
Copyright © 2010, Juniper Networks, Inc.
•
admin
—Full privileges (default); in Enable mode all
EXEC
commands are available. If
no password is set, can log in as admin.
•
monitor
—Privileges for reading all data and performing all actions, but not for
changing any configuration. If no password is set, can log in as monitor.
•
unpriv
—Unprivileged.
•
ftpuser
—Privileged for FTP transactions only; FTP users auto-created with a
namespace creation have this capability. See
namespace
pre-stage for details.
•
disable
—Disable means of logging in to this account. Disabling a user account does not
terminate any current sessions that user has open; it just prevents new sessions from
being established. Optionally, specify a password; this leaves the account as a whole the
same, but forbids login with a password; it is assumed that SSH key access is used
instead. To re-enable the account, the user must un-disable it, and put a password on it.
The no username <userid> disable command prints a message to this effect; it only
exists to avoid stumping users with an apparently irreversible command.
•
full-name
—Set or reset to empty string (with no) the full name (referred to in some
circles as the "gecos") on this account.
•
nopassword
—Allow login to this account without a password.
•
password
—Set the login password for this user. Enter * (asterisk) to disable login; enter
nothing (and confirm) to set no password for a user.
•
0 <cleartext_password>
—Allows the password to be specified in cleartext,
whereby the system encrypts it using the DES algorithm. This password shows in the
encrypted form with show configuration.
•
7 <encrypted_password>
—Allows the password to be provided in the same
encrypted form in which it is stored in the shadow password file (/etc/shadow). Useful
for show configuration, since the cleartext password cannot be recovered (in
cleartext) after it is set.
•
<cleartext_password>
—Enter a cleartext password; if none is specified, the user
is prompted for the password, with entries obscured, requiring the same string to be
entered twice for confirmation.
Tip!
Use password 7 <encrypted_password> when setting user passwords; in case you
ever need to re-apply a saved configuration, the encrypted user passwords are saved (not so
for cleartext passwords) and can be re-applied with the saved configuration.
show
usernames
users [history [username <username>]]
whoami
Notes:
•
usernames
—List of all user accounts and the capabilities of each.
•
users
—List of all currently logged-in users, and related information such as idle time and
what host they have connected from. Optionally, choose history to view the history of
user logins, past and present. You can also optionally specify a username and only the
history of that particular user is displayed.
•
whoami
—The username and capabilities of the currently logged-in user.
Summary of Contents for MEDIA FLOW CONTROLLER 2.0.4 -
