Media Flow Controller Configuration Tasks (Web Interface)
Media Flow Controller Administrator’s Guide
188
Configuring Service Logging (Web Interface)
Copyright © 2010, Juniper Networks, Inc.
3.
Click Save at the top of the page to make changes persistent across reboots.
Tip!
If this Media Flow Controller is going to be managed by a CMC server, set the auto-
upload URL to the address of the CMC server and the filepath to /log.
Figure 61
Log Configuration Page Detail (Access Log Copy/Auto Upload Configuration)
Stream Log Configuration
This log records RTSP streaming transactions. See
“Stream Log (streamlog)” on page 220
for
details. See
Figure 60
.
To configure the streamlog:
1.
Enter this information to the text boxes or select the checkbox as described:
•
Enable—Enable access logging; this records all user activity on the system. The no
variant disables. Default is enabled.
•
Syslog Replicate Enable—Specify whether or not the stream log messages are seen
as part of SYSLOG also. By default the option is disabled (access log is not seen as
part of SYSLOG).
•
Log Format—Specify the format in which stream log is to be obtained. See
streamlog
for CLI details on log formatting.
2.
Click Apply.
3.
Click Save at the top of the page to make changes persistent across reboots.
Figure 62
Log Configuration Page Detail (Stream Log Configuration)
Summary of Contents for MEDIA FLOW CONTROLLER 2.0.4 -
