Media Flow Controller Configuration Tasks (Web Interface)
Media Flow Controller Administrator’s Guide
130
Configuring Static Hosts and ARP (Web Interface)
Copyright © 2010, Juniper Networks, Inc.
Configuring ARP (Web Interface)
Manage Address Resolution Protocol (ARP) entries.
To manage ARP entries:
•
From the left navigation pane in the System Config tab, select ARP.
The Address Resolution page is displayed. See
Figure 19
.
Figure 19
Address Resolution Page
Static and Dynamic ARP Entries
View and remove Static and Dynamic ARP Entries. See
Figure 19
.
To view and remove static and dynamic ARP entry status:
1.
View this information:
•
IP address—The configured IP address for this entry.
•
MAC address—The physical address of this entry.
•
Interface—The port configured for this entry.
•
Active—Whether or not this entry is being used currently.
•
Static—Whether or not this entry comes from DNS.
Summary of Contents for MEDIA FLOW CONTROLLER 2.0.4 -
