Juniper MEDIA FLOW CONTROLLER 2.0.4 -, Administrator'S Manual

Page: 211 / 400

Log Codes and Sub-Codes 211
Media Flow Controller Administrator’s Guide Configuring and Using Media Flow Controller Logs and Alarms
Status/Error Sub-Codes
The Media Flow Controller status sub-codes are shown in Table 12 , see Table 11 for status
codes. Note! Successful transactions are indicated by a 0 (zero) for the status sub-code.
458 Parameter Is Read-Only
459 Aggregate operation not allowed
460 Only aggregate operation allowed
461 Unsupported transport
462 Destination unreachable
500 Internal Server Error
501 Not Implemented
502 Bad Gateway
503 Service Unavailable
504 Gateway Time-out
505 RTSP Version not supported
551 Option not supported
Table 12 Logging Status Sub-Codes
Sub-
Code
Module Name
HTTP Response Line (if any)
Comments
Counters (if any)
10003 NKN_SERVER_BUSY
404 Not Found Session Admission Control due to internal
resource
20003 NKN_BUF_INVALID_OFFSET
416 Requested range not satisfiable Either Start or Stop offset in byte range is
beyond total content length
glob_cm_inval_off
30051 NKN _SSP_BAD_REMAPPED_URL SSP (server side player) remapped the request
URL to an internal URL and received a 404
response from the origin server when
attempting a fetch.
52004 NKN_HTTP_NAMESPACE
4040 Not Found Failed to match any namespace in configuration
glob_http_namespace_err_52004
52005 NKN_HTTP_REQ_RANGE_1
416 Requested Range Not Satisfiable Either Start or Stop byte range in request is
negative
52006 NKN_HTTP_REQ_RANGE_2
416 Requested Range Not Satisfiable Stop offset is less than start offset in byte range
52012 NKN_HTTP_URI
400 Bad Request URI does not exist in the HTTP request
52016 NKN_HTTP_CLOSE_CONN
404 Not Found Failed to tunnel the request because origin
server is NFS or server map
glob_http_close_conn_err_52016
52018 NKN_HTTP_NO_HOST_HTTP11
400 Bad Request HTTP/1.1 request without Host field
Table 11 Logging Status (%s) Codes (Continued)
Code Description