Juniper MEDIA FLOW CONTROLLER 2.0.4 -, Administrator'S Manual

Page: 369 / 400

tcpdump 369
Media Flow Controller Administrator’s Guide Media Flow Controller CLI Commands
default is 1. Sets the number of times the client attempts to authenticate with any
server. To disable retransmissions set it to 0 (zero).
•
timeout
—Sets, or resets to the default (with no), a global communication value for all
servers. Can be overridden in a tacacs-server host command. Range is 1-60,
default is 3. Sets the wait time for retransmitting a request to any server.
show tacacs
settings.
tcpdump
tcpdump [<options>]
Network diagnostic tool. Invokes standard binary, passing command line arguments straight
through. Runs in foreground, printing packets as they arrive, until user hits Ctrl+C.
tech-support
EXEC command. Use this command to collect system information.
tech-support {<URL> | <SCP>}
Upload the tech-support file to the specified URL. Only FTP and TFTP URLs, as well as SCP
pseudo-URLs are supported for the destination. See
“Terminology” on page 30 for the scp
URL format and requirements.
The file is created with the name “nkn_tech-support”. We highly recommend that, if you have
multiple Media Flow Controllers, each Media Flow Controller be configured with a different
path variable (use a different directory) so that tech-support data from one Media Flow
Controller does not overwrite data from another; if different hosts are used for each Media
Flow Controller, then the same path name can be used.
telnet
EXEC command. Use TELNET; or enable or disable, and configure telnet settings.
telnet [<telnet_client_options>]
Invokes the telnet client. The user is returned to the CLI when telnet finishes.
telnet-server
Manage the TELNET server.
telnet-server enable
Enable or disable (with no) the telnet server.
show telnet-server
Telnet server settings.