Juniper MEDIA FLOW CONTROLLER 2.0.4 - Administrator'S Manual Download

Page: 132 / 400

Media Flow Controller Configuration Tasks (Web Interface)

Media Flow Controller Administrator’s Guide

132

Configuring Date, Time, and NTP (Web Interface)

Choose a Time Zone from the drop-down list.

(Optional) Click the enabled link to jump to the NTP page.

Click Apply to set the date, time, and time zone; Cancel to revert to existing configuration.

Click Save at the top of the page to make changes persistent across reboots.

Configuring NTP (Web Interface)

Configure Network Time Protocol (NTP) options.

To configure NTP servers:

•

From the left navigation pane in the System Config tab, select NTP.
The NTP page is displayed. See

Figure 21

NTP Page

Summary of Contents for MEDIA FLOW CONTROLLER 2.0.4 -





































































































































































































































































































































































































Search results

Summary of Contents for MEDIA FLOW CONTROLLER 2.0.4 -

Reviews:

Related manuals for MEDIA FLOW CONTROLLER 2.0.4 -

Brands by name

Popular brands

Juniper MEDIA FLOW CONTROLLER 2.0.4 -, Administrator'S Manual

Search results

Summary of Contents for MEDIA FLOW CONTROLLER 2.0.4 -

Reviews:

Related manuals for MEDIA FLOW CONTROLLER 2.0.4 -

Brands by name

Popular brands