APPENDIX F
M40e Cable Connector Pinouts
•
RJ-45 Connector Pinouts for the M40e Routing Engine MGMT Port on page 289
•
DB-9 Connector Pinouts for the M40e Routing Engine AUX/MODEM and CONSOLE
Ports on page 290
•
RJ-48 Cable Pinouts for E1 and T1 PICs on the M40e Router on page 290
•
DB-9 Connector Pinouts for the M40e CIP BITS Input Ports on page 293
•
M40e X.21 and V.35 Cable Pinouts for EIA-530 PIC on page 294
•
M40e Fast Ethernet PIC 48-port Cable Pinouts on page 296
RJ-45 Connector Pinouts for the M40e Routing Engine MGMT Port
The port on the CIP labeled
MGMT
is an autosensing 10/100-Mbps Ethernet RJ-45
receptacle that accepts an Ethernet cable for connecting the Routing Engine to a
management LAN (or another device that supports out-of-band management). Table
33 on page 289 describes the RJ-45 connector pinout.
Table 33: RJ-45 Connector Pinout
Signal
Pin
TX+
1
TX-
2
RX+
3
Termination network
4
Termination network
5
RX-
6
Termination network
7
Termination network
8
289
Copyright © 2010, Juniper Networks, Inc.
All manuals and user guides at all-guides.com
