on page 233). If you are returning a component, place it in an electrostatic bag before
packing it.
Figure 126: Placing a Component into an Electrostatic Bag
Related
Documentation
Definition of Safety Warning Levels on page 227
•
•
General Safety Guidelines and Warnings for M Series, MX Series, and T Series Routers
on page 229
•
M40e AC Power Electrical Safety Guidelines and Warnings on page 256
•
M40e DC Power Electrical Safety Guidelines on page 257
Fire Safety Requirements for the M40e Router
•
Fire Safety Requirements for M Series, MX Series, and T Series Routers on page 233
Fire Safety Requirements for M Series, MX Series, and T Series Routers
•
General Fire Safety Requirements on page 233
•
Fire Suppression on page 234
•
Fire Suppression Equipment on page 234
General Fire Safety Requirements
In the event of a fire emergency involving routers and other network equipment, the safety
of people is the primary concern. Establish procedures for protecting people in the event
of a fire emergency, provide safety training, and properly provision fire-control equipment
and fire extinguishers.
In addition, establish procedures to protect your equipment in the event of a fire
emergency. Juniper Networks products should be installed in an environment suitable
for electronic equipment. We recommend that fire suppression equipment be available
in the event of a fire in the vicinity of the equipment, and that all local fire, safety, and
electrical codes and ordinances be observed when installing and operating your
equipment.
233
Copyright © 2010, Juniper Networks, Inc.
Appendix A: Safety and Regulatory Compliance Information for the M40e Router
All manuals and user guides at all-guides.com
all-guides.com
