3.
Place one hand under the power supply and grasp a handle on the faceplate with the
other hand. Slide the power supply into the chassis until it contacts the midplane.
4.
Starting with the bottom screws, tighten (but do not overtighten) the thumbscrew
at each corner of the power supply faceplate.
5.
Repeat the procedure to reinstall the second power supply.
6.
To continue the installation, proceed to “Connecting the M40e Router to Management
and Alarm Devices” on page 111.
Figure 62: Reinstalling a Power Supply
Related
Documentation
•
M40e Component Weights
•
M40e Router Physical Specifications on page 269
•
M40e System Architecture Overview on page 59
•
Removing Components from the Chassis Before Installing the M40e Router Without
a Lift on page 83
•
Installing the M40e Chassis into the Rack on page 95
107
Copyright © 2010, Juniper Networks, Inc.
Chapter 9: Installing the M40e Router Without a Mechanical Lift
All manuals and user guides at all-guides.com
