You can also verify correct Routing Engine functioning by issuing the
show chassis routing-engine
command described in “Maintaining the M40e Host
Module Components” on page 131.
7.
Reinstall the rear component cover and tighten the thumbscrew at each corner to
secure it to the chassis. For complete instructions, see “Reinstalling the M40e
Components into the Chassis” on page 97.
CAUTION:
To maintain proper airflow and provide electromagnetic
shielding, do not operate the router without the rear component cover in
place.
Figure 103: Installing a Routing Engine in an M40e Router
Related
Documentation
M40e Field-Replaceable Units (FRUs) on page 157
•
•
Tools and Parts Required to Remove Components from an M40e Router on page 309
•
M40e Routing Engine Description on page 26
•
Routing Engine Interface Cable and Wire Specifications for the M40e Router on page 288
Replacing the M40e Packet Forwarding Engine Components
For instructions on replacing Packet Forwarding Engine components, see:
•
Replacing an FPC in an M40e Router on page 191
•
Replacing a PCG in an M40e Router on page 196
•
Replacing a PIC in an M40e Router on page 198
•
Replacing PIC Cables in an M40e Router on page 203
Copyright © 2010, Juniper Networks, Inc.
190
M40e Multiservice Edge Router Hardware Guide
All manuals and user guides at all-guides.com
