•
Press and hold the FPC offline button until the green
OK
LED next to the button
lights steadily, in about 5 seconds. The LEDs and offline button for each FPC are
located directly above it on the craft interface.
•
Issue the CLI command:
user@host>
request chassis fpc slot
slot-number
online
For more information about the command, see the
Junos OS System Basics and
Services Command Reference
.
CAUTION:
After the
OK
LED lights steadily, wait at least 30 seconds before
removing the FPC again, removing an FPC from a different slot, or inserting
an FPC in a different slot.
You can also verify correct FPC and PIC functioning by issuing the
show chassis fpc
and
show chassis fpc pic-status
commands described in“Maintaining M40e FPCs” on page 132
and “Maintaining M40e PICs and PIC Cables” on page 139.
Figure 105: Installing an FPC in an M40e Router
195
Copyright © 2010, Juniper Networks, Inc.
Chapter 16: Replacing M40e Hardware Components
All manuals and user guides at all-guides.com
