Juniper JUNOSE 11.1.X - QUALITY OF SERVICE CONFIGURATION GUIDE 3-21-2010, Configuration Manual

Page: 376 / 398

Table 49: show interfaces atm Output Fields
Field Description Field Name
Per-port queuing mode status: disabled, low-latency,
low-cdv, none Administrative qos-mode-port
Per-port queuing mode status: disabled, low-latency,
low-cdv, none Operational qos-mode-port
Configured shaping mode for the interface:
■
disabled—Shaping mode is configured but
disabled.
■
frame—Default shaping mode for shaping and
policing rates. Reports statistics such as
transmitted bytes and dropped bytes based on
bytes within frames.
■
cell—Shaping mode for shaping and policing
rates is cell-based; resulting traffic stream
conforms exactly to the policing rates configured
in downstream devices. Reports statistics in
bytes within cells and also accounts for cell
encapsulation and padding overhead.
■
none—Shaping mode is not configured.
Administrative qos-shaping-mode
Actual shaping mode for the interface. The router
determines the operational shaping mode based on
the values configured for the
qos-shaping-mode
command or the
qos-port-mode
command. For more
information, see “Per-Packet Queuing on the SAR
Scheduler Overview” on page 163.
■
disabled—Shaping mode is configured but
disabled.
■
frame—Default shaping mode for shaping and
policing rates. Reports statistics such as
transmitted bytes and dropped bytes based on
bytes within frames.
■
cell—Shaping mode for shaping and policing
rates is cell-based; resulting traffic stream
conforms exactly to the policing rates configured
in downstream devices. Reports statistics in
bytes within cells and also accounts for cell
encapsulation and padding overhead.
■
none—Shaping mode is not configured.
Operational qos-shaping-mode
QoS profile attachment at or below the displayed
interface. For example, if the interface being
displayed is a VC, and the attachment is at the ATM
AAL5 interface, the ATM AAL5 interface attachment
is displayed. Attached QoS profile
344 ■
Monitoring the QoS Configuration of ATM Interfaces
JUNOSe 11.1.x Quality of Service Configuration Guide