Juniper JUNOSE 11.1.X - QUALITY OF SERVICE CONFIGURATION GUIDE 3-21-2010, Configuration Manual

Page: 272 / 398

■
assured-rate
■
controlled-interface-type
■
instance-interface-type
■
node
■
qos-parameter-define
■
qos-profile
■
queue
■
range
■
scheduler-profile
■
shaping-rate
■
shared-shaping-rate
■
subscriber-interface-type
■
traffic-class
■
weight
Parameter Instances for QoS Clients Overview
The QoS administrator implements a QoS architecture for the provider based on QoS
profiles and parameter definitions. The QoS client creates the parameter instances
and attaches QoS profiles to logical interfaces. The QoS client can be a user accessing
parameters through CLI or through client software such as RADIUS or SRC.
As a QoS client, you can use QoS parameter instances to set the following attributes
of a node or queue:
■
Assured rate
■
Shaping rate
■
Shared-shaping rate
■
Scheduler weight
Global QoS Parameter Instance Overview
In the following example, a parameter instance is created in Global Configuration
mode.
host1(config)# qos-parameter max-subscriber-bandwidth 8000000
When you create a parameter instance in Global Configuration mode, the value that
you set for a rate becomes the default value for the router. We recommend that you
create a global default value for a parameter instance to provide a minimal level of
service by default for the router.
240 ■
Parameter Instances for QoS Clients Overview
JUNOSe 11.1.x Quality of Service Configuration Guide