Juniper JUNOSE 11.1.X - QUALITY OF SERVICE CONFIGURATION GUIDE 3-21-2010, Configuration Manual

Page: 234 / 398

3.
(Optional) Verify the new QoS profile configuration.
host1(config)# show qos-profile l2tpQpro25
qos-profile l2tpQpro25:
t-class interface rule traffic scheduler queue drop statistics
group type type class profile profile profile profile
-------- --------- ----- --------- --------- ------- ------- ----------
l2tp-session queue best-effort 400k default default default
tcGroup1 l2tp-session queue voice 100k default default default
Related Topics
■
Supported Interface Types for QoS Profiles on page 131
■
Sample Scheduler Hierarchies for L2TP on page 197
■
group
■
interface
■
qos-profile
■
queue
■
scheduler-profile
■
show qos-profile
■
traffic-class
Configuring QoS for Tunnel-Server Ports for L2TP LNS Sessions
You can configure QoS for a tunnel-service port that can be used as a dynamic
interface associated with an L2TP LNS session.
Before you configure QoS for a tunnel-server port:
■
Configure the dedicated or shared tunnel-server port.
See JUNOSe Physical Layer Configuration Guide .
■
Configure the traffic classes.
See “Configuring Traffic Classes That Define Service Levels” on page 14.
■
Configure the queuing hierarchy.
See “Configuring Queue Profiles to Manage Buffers and Thresholds” on page 22.
■
Configure the scheduler hierarchy and shaping with scheduler profiles.
See “Configuring a Scheduler Hierarchy” on page 47.
To configure QoS for the tunnel-server port:
1.
Create the QoS profile.
202 ■
Configuring QoS for Tunnel-Server Ports for L2TP LNS Sessions
JUNOSe 11.1.x Quality of Service Configuration Guide