Juniper JUNOSE 11.1.X - QUALITY OF SERVICE CONFIGURATION GUIDE 3-21-2010, Configuration Manual

Page: 359 / 398

ethernet Eth1/0/0 ethernet port wgt 8
superset cluster superset node AF 100000000 wgt 8
set vlanset1 set node AF wgt 8
vlan Eth1/0/0.1 vlan queue AF AF wgt 8
vlan Eth1/0/0.2 vlan queue AF AF wgt 8
set vlanset2 set node AF wgt 8
vlan Eth1/0/0.3 vlan queue AF AF wgt 8
Meaning
Table 39 on page 327 lists the show qos scheduler-hierarchy command output fields.
Table 39: show qos scheduler-hierarchy Output Fields
Field Description Field Name
Type of interface interface
Traffic resource associated with the logical interface resource
Individual shaping rate of a traffic resource in bits
per second shaping rate
Configured shared-shaping rate in bits per second shared shaping rate
Configured assured rate in bits per second or
configured weight assured rate or weight
Related Topics
■
Configuring a Scheduler Hierarchy on page 47
■
Configuring Simple Shared Shaping on page 81
■
Configuring Compound Shared Shaping on page 100
■
Configuring Interface Sets for QoS on page 213
■
Configuring Interface Supersets for QoS on page 212
■
show qos scheduler-hierarchy
Monitoring the Configuration of Scheduler Profiles
Purpose
Display information about scheduler profiles. If you do not specify the scheduler
profile name, data for all scheduler profiles is displayed.
You can display the values that you configured using a QoS parameter for assured
rate, shaping rate, and shared-shaping rate.
Monitoring the Configuration of Scheduler Profiles
■ 327
Chapter 31: Monitoring QoS on E Series Routers