Juniper JUNOSE 11.1.X - QUALITY OF SERVICE CONFIGURATION GUIDE 3-21-2010, Configuration Manual

Page: 367 / 398

distinguish among the counters used for different drop rates from the output of this
command. As a result, for ES2 10G ADV LMs, you cannot identify the counters used
for committed, conformed, and exceeded packet dropping by WRED functionality
from the value displayed in this field. View the value displayed for the Dropped by
WRED committed field in the output of the
show ip interface command to know
the cumulative number of committed, conformed, and exceeded packets dropped
by WRED for ES2 10G ADV LMs.
To display rate statistics for the previous or current rate period:
host1# show egress-queue rates previous interface gigabitEthernet 11/0 svlan
0
host1# show egress-queue rates current interface gigabitEthernet 11/0 svlan
0
To display rate statistics for an L2TP session:
host1# show egress-queue rates l2tp session session1
To display rate statistics for a tunnel interface, specify the interface at the root of the
scheduler hierarchy located on the tunnel-service interface or at the same hierarchy
for LNS GRE tunnel traffic:
host1# show egress-queue rates tunnel-server 6/0
To display rate statistics for queues bound to the specified interface:
host1# show egress-queue rates interface gigabitEthernet 11/0 svlan 0 explicit
To display the sum of all rates of queues bound to interfaces that are stacked above
the specified interface.
host1# show egress-queue rates interface gigabitEthernet 11/0 svlan 0 summary
To display rate statistics for queues belonging to a specific traffic class:
host1# show egress-queue rates interface gigabitEthernet 11/0 svlan 0 traffic-class
voice
To filter output based on the number of queues with rates that exceed the specified
value.
host1# show egress-queue rates gigabitEthernet 1/0 rate-exceeding committed
host1# show egress-queue rates gigabitEthernet 1/0 rate-exceeding conformed
host1# show egress-queue rates gigabitEthernet 1/0 rate-exceeding exceeded
host1# show egress-queue rates gigabitEthernet 1/0 rate-exceeding forwarded
Meaning
Table 44 on page 335 lists the show egress-queue rates command output fields.
Table 44: show egress-queue rates Output Fields
Field Description Field Name
Name of the interface interface
Monitoring Forwarding and Drop Rates on the Egress Queue
■ 335
Chapter 31: Monitoring QoS on E Series Routers