Juniper JUNOSE 11.1.X - QUALITY OF SERVICE CONFIGURATION GUIDE 3-21-2010, Configuration Manual

Page: 374 / 398

host1# show qos-profile brief
qos-profile atm-default referenced by 1 attachment
qos-profile serial-default referenced by 1 attachment
qos-profile ethernet-default referenced by 1 attachment
qos-profile server-default referenced by 1 attachment
qos-profile lag-default referenced by 1 attachment
To display information about the QoS profiles attached to a specific tunnel interface,
specify the interface at the root of the scheduler hierarchy located on the
tunnel-service interface or at the same hierarchy for LNS GRE tunnel traffic:
host1# show qos-profile references tunnel-server 6/0
To display information about the QoS profiles attached to a specific L2TP session:
host1# show qos-profile references l2tp-session session1
To display attachments for QoS profiles only on the specified interface and not QoS
profiles stacked above the interface:
host1# show qos-profile references interface gigabitEthernet 6/0 explicit
Meaning
Table 48 on page 342 lists the show qos-profile command output fields.
Table 48: show qos-profile Output Fields
Field Description Field Name
Name of QoS profile qos-profile
Name of the traffic-class group associated with the
interface t-class group
Type of interface interface type
Whether the rule is a group node, scheduler node,
queue, or shadow node rule type
Name of the traffic class associated with the interface traffic class
Name of the scheduler profile associated with the
interface scheduler profile
Name of the queue profile associated with the
interface queue profile
Name of the drop profile associated with the interface drop profile
Name of the statistics profile associated with the
interface statistics profile
Type of interface or port type to which the QoS profile
is attached attachment
Number of QoS profiles attached to port types Port attachments
342 ■
Monitoring the Configuration of QoS Profiles
JUNOSe 11.1.x Quality of Service Configuration Guide