Juniper JUNOSE 11.1.X MULTICAST ROUTING, Configuration Manual

Page: 86 / 270

231.1.1.1 FastEthernet1/1 Version3 17.0.0.2 44 0
Excluded Sources:
51.0.0.1 0
51.0.0.2 0
51.0.0.3 0
Counts: 5 version-3, 0 version-2, 0 version-1, 0 check state, 0 disabled
(5 total)
0 excluded
Source-groups: 3 included, 3 excluded
■
Example 2—With OIF mapping
host1:boston# show ip igmp groups
Grp Address Interface State Reporter ExpTim oldHTo
------------- --------------- ----------- ------------ ------ ------
232.1.1.1 ATM5/0.12 Version3 1.1.1.2 371 0
oif-map OIFMAP ATM5/0.121
232.1.1.1 ATM5/0.13 Version3 1.1.1.3 375 0
oif-map OIFMAP ATM5/0.121
232.1.1.2 ATM5/0.12 Version3 1.1.1.2 373 0
Included Sources:
10.1.1.2 oif-map OIFMAP self 373
10.1.1.10 oif-map OIFMAP ATM5/0.120 373
10.1.1.11 oif-map OIFMAP ATM5/0.121 373
232.1.1.2 ATM5/0.13 Version3 1.1.1.3 375 0
Included Sources:
10.1.1.2 oif-map OIFMAP self 375
10.1.1.10 oif-map OIFMAP ATM5/0.120 375
10.1.1.11 oif-map OIFMAP ATM5/0.121 375
Counts: 4 version-3, 0 version-2, 0 version-1, 0 check state, 0 disabled
(4 total)
0 excluded
Source-groups: 6 included, 0 excluded
■
See show ip igmp groups.
show ip igmp interface
■
Use to display IGMP information for interfaces on which you enabled IGMP.
■
Specify the brief keyword to see a summary of the information.
■
Specify the count keyword to see the number of IGMP interfaces.
■
Specify the group address keyword to see information for interfaces that belong
to that group.
■
Field descriptions
■
Interface—Type of interface and interface specifier. For details about interface
types and specifiers, see Interface Types and Specifiers in
JUNOSe Command
Reference Guide .
■
address—IP address of the interface
■
Administrative state—Status of the interface in the software: enabled or
disabled
64 ■
Monitoring IGMP
JUNOSe 11.1.x Multicast Routing Configuration Guide