Juniper JUNOSE 11.1.X MULTICAST ROUTING, Configuration Manual

Page: 226 / 270

Explicit Host Tracking: enabled
Max-Group limit: No Limit
Admission-Bandwidth limit: No limit
IOA Packet Replication: None
Group Count: 1
Interface statistics:
Rcvd: 2 reports, 0 leaves, 0 wrong version queries
Sent: 2 queries
Groups learned: 1
Counts: 0 down, 0 init state, 1 querier, 0 non-querier, 1 Total
■
Example 2
host1# show ipv6 mld interface gigabitEthernet 3/0.0
Interface GigabitEthernet3/0.0 address 10.1.1.1/255.255.255.0
Administrative state enabled, Operational state enabled
Interface parameters:
Version 1
State Querier
Query Interval 125 secs, 123 secs before the next query
Other querier present interval 250 secs
Maximum response time 100 (in 10ths of a second)
Last member query interval 10 (in 10ths of a second)
Robustness 3
No inbound access group
No inbound access source-group
No inbound apply-oif-map
Immediate Leave: disabled
Explicit Host Tracking: enabled
Max-Group limit: No Limit
Group Count: 0
IOA packet replication gigabitEthernet 3/8.1
Interface statistics:
Rcvd: 0 reports, 0 leaves, 0 wrong version queries
Sent: 14 queries
Groups learned: 0
Counts: 0 down, 0 init state, 1 querier, 0 non-querier, 1 Total
■
See show ipv6 mld interface.
show ipv6 mld interface brief
■
Use to display a summary of MLD information for interfaces on which you
enabled MLD.
■
Field descriptions
■
Interface—Type of interface and interface specifier. For details about interface
types and specifiers, see Interface Types and Specifiers in
JUNOSe Command
Reference Guide .
■
Intf Address—IPv6 link-local address of the interface
■
Ver—MLD version
■
State—Function of the interface: querier or nonquerier
204 ■
Monitoring MLD
JUNOSe 11.1.x Multicast Routing Configuration Guide