Juniper JUNOSE 11.1.X MULTICAST ROUTING, Configuration Manual

Page: 96 / 270

■
Use to specify the interval, in tenths of a second, at which the upstream interface
transmits unsolicited reports.
NOTE: Issue this command only on the upstream interface. Otherwise, this command
has no effect.
■
Example
host1(config-if)# ip igmp-proxy unsolicited-report-interval 600
■
Use the no version to transmit unsolicited reports using the default value,
400 tenths of a second.
■
See ip igmp-proxy unsolicited-report-interval
ip igmp-proxy V1-router-present-time
■
Use to specify how long, in seconds, the router calculates an IGMPv1 querier
router to exist on the subnetwork after the router receives an IGMP V1 query on
this interface.
NOTE: Issue this command only on the upstream interface. Otherwise, this command
has no effect.
■
Example
host1(config-if)# ip igmp-proxy V1-router-present-time 600
■
Use the no version to set the time to the default value, 10 seconds.
■
See ip igmp-proxy V1-router-present-time
Establishing the IGMP Proxy Baseline
You can set the counters for the number of queries received and reports sent on the
upstream interface to zero. This feature enables you to establish a reference point,
or baseline, for IGMP proxy statistics.
baseline ip igmp-proxy interface
■
Use to set the counters for the number of queries received and reports sent on
the upstream interface to zero.
NOTE: Issue this command only on the upstream interface. Otherwise, this command
has no effect.
■
Example
74 ■
Establishing the IGMP Proxy Baseline
JUNOSe 11.1.x Multicast Routing Configuration Guide