Juniper JUNOSE 11.1.X MULTICAST ROUTING, Configuration Manual

Page: 159 / 270

■
Use to set the counters for DVMRP statistics to zero, which establishes a reference
point, or baseline, for DVMRP statistics.
■
Example
(host1)# baseline ip dvmrp
■
There is no no version.
■
See baseline ip dvmrp.
show ip dvmrp
■
Use to display DVMRP information for a VR.
■
Field descriptions
■
Dvmrp Administrative State—State of DVMRP in the software: Enabled or
Disabled
■
Mcast Administrative State—State of multicasting in the software: Enabled
or Disabled
■
Dvmrp Version—Version of DVMRP with which this software is compatible
■
GenerationID—A number the router generates each time it reboots; when
the number changes, neighbors discard all information previously learned
from the router
■
Number of Routes—Number of routes in the DVMRP routing table
■
Number of Triggered Routes—Number of routes waiting to be advertised,
because a parameter for the route changed
■
Reachable Routes—Number of routes that the router can currently reach
■
Route-hog-notification—Number of DVMRP routes that the router can record
before it generates a system log warning message
■
Route-limit—Maximum number of routes that the router can advertise on
each interface
■
Send-S32-Prunes-Only—Indicator of whether the router sends only S-32
prunes
■
true—Router sends only S-32 prunes and grafts to ensure compatibility
with other protocols, such as PIM
■
false—Router sends S-32 and S/Prefix grafts and prunes
■
Example
host1:boston> show ip dvmrp
Routing Process DVMRP - Distance Vector Multicast Routing Protocol
Dvmrp Administrative State: Enabled
Multicast Administrative State: Enabled
Dvmrp Version: 3.255
Generation ID: 0x46828e2b
Number of Routes: 2
Number of Triggered Routes: 0
Monitoring DVMRP
■ 137
Chapter 4: Configuring DVMRP