Juniper CTP151 Platform, Hardware Manual, Page: 79 / 104

CHAPTER 12
Accessing the CTP151 Platform
IN THIS CHAPTER
Using HyperTerminal to Access the CTP151 Device | 73
Using SSH to Access the CTP151 Device | 74
Using HyperTerminal to Access the CTP151 Device
You can use the HyperTerminal application to access the device console. Before you begin connecting a
CTP151 device to a console management device, you must ensure that the HyperTerminal properties of
the serial port on the console management device are set as follows:
•
Baud rate—9600
•
Flow control—None
•
Data—8
•
Parity—None
•
Stop bits—1
•
DCD state—Disregard
RELATED DOCUMENTATION
Bringing Up the CTP151 with CTPOS on Internal SSD | 76
Configuring the First Boot Script for the CTP151 Device | 77
Using SSH to Access the CTP151 Device | 74
73