Juniper CTP151 Platform, Hardware Manual, Page: 86 / 104

Powering Off the CTP151 Device
To power off a CTP151 device gracefully using the CTP Menu:
1. On the system console (not an SSH session), go to the CTPOS Main Menu.
2. From the Main Menu, select 5) Node Operations.
3. From the Node Operations Menu, select 10) Powerdown Node.
4. Monitor the console output during shutdown and look for the following message: reboot: Power down.
5. Turn off the power switch on the rear panel of the CTP151 device.
6. Remove the power cord.
RELATED DOCUMENTATION
Bringing Up the CTP151 with CTPOS on Internal SSD | 76
Powering On the CTP151 Device | 75
80