Juniper CTP151 Platform, Hardware Manual, Page: 72 / 104

CHAPTER 11
Cabling
IN THIS CHAPTER
Connecting a CTP151 Device to a Network for Out-of-Band Management | 65
Connecting a CTP151 Device to a Management Console | 66
Connecting a CTP151 Device to a Management Console Using Mini-USB Type-B Console Port | 67
Cabling a CTP151 Interface Module | 68
Connecting a CTP151 Device to a Network for Out-of-Band Management
You can monitor and manage the CTP151 device using a dedicated management channel. The CTP151
device has four 10/100/1000BASE-T RJ-45 ports, two SFP+ ports, one management port, one RJ-45
console port, one Mini-USB console port, and one USB 3.0 port. Use the management port to connect the
CTP151 device to a network for out-of-band management.
Ensure that you have an appropriate cable available.
To connect a CTP151 device to a network for out-of-band management (see Figure 14 on page 66 ):
1. Connect one end of the cable to the management port (labeled MGMT) on the CTP151 device.
2. Connect the other end of the cable to the management switch (see Figure 14 on page 66 ).
65